HEBU medical HF 9514 Instrucciones Para El Uso página 61

HBS x-touch 300 argon
12 System maintenance work
12.1 Cleaning
The electrosurgical unit can be wiped using a cloth dampened with standard disinfectant, and so kept
clean using the simplest possible method. Avoid allowing cleaning fluid and disinfectant to penetrate
into the unit.
12.2 Fuses
The fuse sockets are located on the back of the unit. The unit works with two fuses of 6.3 A each.
Exchanging the fuses:
◼
Disconnect the unit from the mains
◼
Release the fuse from the retainer using a flat blade screwdriver
◼
Exchange the fuse
After an exchange of fuses, the unit must be checked by suitably qualified personnel.
12.3 Transport
Prevent mechanical damage and moisture.
If the unit has been stored for a long period in a cold environment, wait before removing the protective
packaging until the unit has reached room temperature.
During transportation, the standard safety measures additionally apply.
Only ever transport the unit in its original packaging.
12.4 Environmental directives
From the implementation date of the European directive 2002/96/EU as
national legislation, the following regulations apply:
◼
Electrical and electronic units must not be disposed of with normal
household waste.
◼
The consumer is required by law to return electrical and electronic devices
at the end of their service life to designated public collection points or to the
place of purchase.
Disposal details are set out by the applicable local legislation in the relevant
country. The symbol on the product, the instructions for use or the packaging
indicates the relevant applicable legislation. By sending end-of-life devices for
reuse, material recycling or other forms of utilization you are making a major
contribution to environmental protection.
Please also send the unit packaging for environmentally responsible recycling
after the end of the product's life.
EN
61