General Description; Control Panel; Machine Installation - SOLAC CA4810 Instrucciones De Uso

ENGLISH
Automatic Espresso machine
CA4810
USE AND CARE:
- Do not use the appliance if its accessories are not properly fitted.
- Do not switch the appliance on without water.
- Do not use the appliance if the on/off switch does not work.
- Do not move the appliance while in use.
- Respect the MAX level
- Disconnect the appliance from the mains when not in use and before
undertaking any cleaning task.
- Unplug the appliance from the mains before refilling the water tank.
- Store this appliance out of reach of children and/or persons with physi-
cal, sensory or reduced mental or lack of experience and knowledge.
- Do not store the appliance if it is still hot.
- Only use water with the appliance.
- The use of bottled mineral water adapted for human consumption is
recommended.
- Never leave the appliance connected and unattended if is not in use.
This saves energy and prolongs the life of the appliance.
GET TO KNOW YOUR AUTOMATIC COFFEE MACHINE

GENERAL DESCRIPTION

1 External Drip Tray
2 External Drip Tray Cover
3 Internal Drip Tray
4 Coffee Grounds Container
5 Metal tube
6 Steam Nozzle
7 Nozzle cover
8 Steam indicator light
9 Adjustable coffee spout

10 Control Panel

11 Coffee Bean Container
12 Coffee Beans Container Cover
13 Cup Lighting
14 Water Tank
15 Power cord
16 Service Door
17 Brewer
18 Cleaning brush
CONTROL PANEL
A Flashing: Low water level/ Water tank missing (14)
B Lack of bean
C Steadily lights up: Coffee grounds container (4) is full
Flashing light: Internal Drip Tray (3) /Coffee grounds container is
missing (4)
D Steadily lights up: Brewer is missing (17)/ Installed improperly
Flashing light: Service door (16) is opened / Installed improperly
E Steadily lights up: Requires descaling
Flashing light: Descaling is under process
F Empty System Function is running
G Power ON/OFF Button
H Steam button
I Hot Water Button
J Strong Coffee Button
K Mild Coffee Button
L Favourite Function Button
ACCESSORY
- In the box are included:
- Packs of cleaning agents for the process of self-cleaning.
- Cleaning cloth for Control panel.
- Cleaning brush.

MACHINE INSTALLATION

- Remove any protective films, stickers and any other packing material
on the appliance.
- Choose a safe and stable surface with an easy to reach power supply
and leave space (minimum distance from each side) around the machi-
ne.
- Insert the external drip tray (1).It has magnets to facilitate assembly.
Make sure it is inserted correctly.
- Fill the water tank (14) with water (see "FILLING THE WATER TANK").
- Fill the bean box (11) with coffee bean (SEE "FILLING THE COFFEE
BEAN CONTAINER).
- Unwind and straighten the power cord and insert the plug into the
socket located on the back of the machine. Insert the other end of the
power cord into a wall socket with suitable power voltage.
DAILY OPERATION
MAKING YOUR COFFEE
- Switch on the appliance by pressing the power on/off button (G).
- The appliance will rinse itself when turned on and when turned off and
when it turns itself off automatically. Place an empty container under
the adjustable coffee spout before turning on or off.
OPTION CANCELLATION AUTOMATIC CLEANING:
As you can always do Cleaning Manually (see MANUAL RINSING), if
you consider the AutoClean option annoying, you can override that
function as follows:
Open and remove the Service Door (16) (See Figs 2 and 3)
Press and hold the ON / OFF button for a few seconds until 2 beeps
are heard.
That indicates that you have disabled self-cleaning
To reactivate it, repeat operation, until you hear the double beep
- The appliance is then in the standby condition.
- Place a cup under the coffee spout (9) and adjust the height of the
spout the fit the cup. Depending on the size of the cup (too tall or too
wide) you can remove the drip tray (1) or adjust the position of the drip
tray as showed in (Fig 1).
- Depending on the taste of coffee you would like to have, press strong
coffee button (J) or mild coffee button (K).
- The coffee button being pressed will light on and continue to be lit indi-
cating that the appliance is preparing the cup of coffee.
- While it is brewing, the cup lighting (13) will activate.
- When the appliance is back to standby condition, the coffee is ready to
serve.
Tip: the strong coffee button (J) with higher coffee intensity which
recommend for espresso, while both coffee button volumes (J, K, L)
can be adjusted (see Section FURTHER SETTING / Volume of Coffee
and Water)
Note: Press the hot water button (I) (see Section HOT WATER) to
clean inside of the coffee maker before first use.
FILLING THE WATER TANK
- When (A) Icon is flashing, the water tank (14) is in low water level and
requires filling the water tank.
- Lift the water tank (14) by using the lid as the handle.
- Rinse the water tank with fresh water and then fill the tank to the Max
level and place it back into the machine. Make sure it is fully inserted.
Note: To prevent overflow of water from the water tank, do not add
water directly into the appliance with another container.
IMPORTANT: Never fill the water tank with warm, hot, sparkling
water or any other liquid which might damage the water tank and the
machine.
EN