cecotec ENERGYSILENCE 1600 Woody Smart Manual De Instrucciones página 15

ENGLISH
- Instruction manual
- The fan comes packed with the grilles separately. Fix the grilles in place before switching
on the fan.
- Do not switch on the fan unless all parts are correctly assembled.
- Switch on the fan only when it is in an upright position. Switching it on in any other position
could be dangerous.
3. PRODUCT ASSEMBLY
Fig. 2
- Remove the safety screw from the tripod bracket. Use a screwdriver to screw the wooden
legs to the tripod bracket. Screw the safety screw between the holes in the rod supports
and the tripod bracket. Do the same for through screws and through nuts. Each leg has a
through screw and through nut.
- Install the rod supports with the thumbscrew. Place the three rods on the central leg and
screw them together with the thumbscrew and nut.
- Install the main body of the fan on top of the tube. Make sure they are in place.
- Install the motor in the rear guard. To do this, remove the four screws from the motor,
install the rear guard, and screw the four screws back on.
- Install the blades on the motor shaft and tighten it with the through screw.
- Join the front and rear guards and close them with the holding tab. Then, fix the through
screw of the guard.
- The fan height is adjustable.
- To install the control panel, first loosen the screw on the metal tube, then place the control
panel on the tube so that the plastic protrusion on the panel matches the hole in the tube.
Lastly, tighten the retaining screw.
4. OPERATION
- The fan can be operated from both the control panel and the remote control.
- Press the ON button to switch the fan on and change the speed.
- The fan has 3 speeds:
1. Low speed
Medium speed
2.
3. High speed
- Press the OFF button to turn off the device.
- Press the operating-mode button on the remote control to change the operating mode:
night, eco, or normal.
28 ENERGYSILENCE 1600 WOODY SMART
- Press the timer button to set the switch-off time: from 0.5 to 7.5 hours, in 0.5-hour intervals.
- The fan can operate in oscillation or stationary mode. Press the oscillation button, located
on the rear of the fan (motor), to activate oscillation mode.
5. CLEANING AND MAINTENANCE
- To get the most out of the fan, follow these instructions:
- Before cleaning the fan, unplug the power cord and allow the fan to come to a complete
stop.
- Do not allow water to drip onto or into the housing.
- Use a soft, damp cloth and a neutral soap.
- Do not use any of the following to clean the appliance: petrol, solvent, or benzene.
- In case of malfunction or doubt as to whether the appliance is working properly, do not
attempt to repair it yourself, as this may result in fire or electric shock.
- Check the fan base periodically.
- Do not immerse the appliance in water or any other liquid or place it under running water.
6. TECHNICAL SPECIFICATIONS
Product reference: 05918
Product: EnergySilence 1600 Woody Smart
Power: 50 W
Voltage: 220-240 V ~, 50/60 Hz
Description
Fan maximum flow
Fan power consumption
Service value
Energy consumption in off mode
Fan sound power level
ENGLISH
Symbol Value Unit
F 66.8 m /min
3
P 47.0 W
SV 1.4 (m /min)/W
3
P 0.0 W
OFF
L 65.8 dB (A)
WA
ENERGYSILENCE 1600 WOODY SMART 29