Descargar Imprimir esta página

VALBERG 14S44 D WAD929C Instrucciones De Uso página 23

Ocultar thumbs Ver también para 14S44 D WAD929C:

Publicidad

Idiomas disponibles

Idiomas disponibles

C
Useful information
Moving the appliance
• If the appliance must be moved, try to keep it in the vertical
position. If absolutely necessary, it can be positioned on its
back.
Seals
• One of the factors that cause odours to form in the
dishwasher is food that remains trapped in the seals. Periodic
cleaning with a damp sponge will prevent this from occurring.
42
EN
C
Useful information
Troubleshooting tips
Before calling for service
Reviewing the charts on the following pages may save you from calling for service
Problem
Possible causes
Fuse blown, or the circuit
break tripped.
Power supply is not turned
Dishwasher doesn't start
on.
Water pressure is low
Door of dishwasher not
properly closed.
Twisted or trapped drain
hose.
Filter clogged.
Water not pumped from
dishwasher
Kitchen sink clogged.
43
What to do
• Replace fuse or reset
circuit breaker.
• Remove any other
appliances sharing the
same circuit with the
dishwasher.
• Make sure the dishwasher
is turned on and the door is
closed securely.
• Make sure the power cord
is properly plugged into the
wall socket.
• Check that the water
supply is connected
properly and the water is
turned on.
• Make sure to close the
door properly and latch it.
• Check the drain hose.
• Check the filter system.
• Check the kitchen sink
to make sure it is draining
well. If the problem is
the kitchen sink that is
not draining, you may
need a plumber rather
than a serviceman for
dishwashers.
EN

Publicidad

loading

Este manual también es adecuado para:

976711