VALBERG 14S44 D WAD929C Instrucciones De Uso página 25

C
Useful information
Problem Possible causes
Dishes block detergent
Detergent left in dispenser
dispenser
Improper loading
Dishes are removed too
soon
The dishes aren't drying
Wrong program has been
selected.
Use of cutlery with a low-
quality coating.
WARNING
Self-repair or non-professional repair may cause serious
risks to the safety of the user of the appliance and impact
warranty.
46
What to do
• Re-loading the dishes
properly.
• Use gloves if detergent
residue can be found
on dishes to avoid skin
irritations.
• Do not empty your
dishwasher immediately
after washing. Open the
door slightly so that the
steam can come out. Take
out the dishes until the
inside temperature is safe
to touch. Unload the lower
basket first to prevent the
dropping water from the
upper basket.
• With a short program,
the washing temperature is
lower, decreasing cleaning
performance. Choose
a program with a long
washing time.
• Water drainage is more
difficult with these items.
Cutlery or dishes of this
type are not suitable for
washing in the dishwasher.
EN
C
Useful information
Error codes
If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
Codes Meanings
The Rapid light
Longer inlet time.
flicker fleetly
The 90 min
light and Rapid Not reaching required
light flicker temperature.
fleetly
The Glass light
Overflow.
flicker fleetly
WARNING
• If overflow occurs, turn off the main water supply before
calling a service.
• If there is water in the base pan because of an overfill or
small leak, the water should be removed before restarting
the dishwasher.
• If there is an error code that cannot be solved, please
request professional assistance.
47
Possible causes
Faucets is not opened, or water
intake is restricted,or water
pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
EN