Publicidad
Idiomas disponibles
Idiomas disponibles
If the unit is not used for a long period of time, it is necessary to carry out the following operations before storing it.
1. Turn off the device with the Power button and unplug the power cord from the power outlet.
2. Eliminate the water deposited in the water tank and dry it thoroughly
3. Clean the air filter and let it dry completely
4. Place the power cord in the water tank
5. Replace the filter
6. Store the device in an upright position and in a cool, dry and ventilated place.
Troubleshooting
In the event of malfunctions, before contacting an Authorized Service Centre, check the table below to see if it is
possible to solve some problems:
Problem
The dehumidifier is not
working
The noise increases
suddenly during opera-
tion
Reduced dehumidifica-
tion effect
E2
LO
HI
CL
CH
V 04/23
CONSERVATION AND STORAGE
Possible cause
The temperature is above 35 ° C or
below 5 °C.
The internal tank is full.
The plug it's not correctly connected
The humidity in the room is at least 3%
lower than that set
The unit is placed on an uneven
surface.
The air filter is clogged
The filter is full of dust.
The air inlet and outlet are blocked
Humidity sensor problem
The humidity present in the room is less
than 30%
The humidity in the room is higher than
80%
Low ambient temperature protection
below 5°C
Protection for high ambient temperature
above 35°C
Solution
The appliance does not work at these
temperatures
Empty the tank and position the tank correctly.
Connect the plug.
Set the humidity% lower than 3% compared to
that in the room
Place the unit on a level and stable surface.
Clean the filter
Clean the filter.
Remove objects blocking the air inlet and
outlet.
Contact a service center to replace the sensor
The protection system is activated and the
dehumidifier stops
29
Publicidad
