Connecting The Power Cord - Oki LE840 Guia Del Usuario

2. PRINTER SETUP
2.2 Connecting the
Power Cord
CAUTION!
1. Make sure that the printer
Power Switch is turned to
the OFF position ( )
before connecting the
Power Cord to prevent
possible electric shock or
damage to the printer.
2. Connect the Power Cord
to a supply outlet with a
properly grounded
(earthed) connection.
1. Make sure that the printer Power Switch is in the OFF ( ) position.
Connect the Power Cord to the printer as shown in the figure below.
Power Switch
2. Plug the other end of the Power Cord into a grounded outlet as shown
in the figure below.
Power Cord
[Example of US Type]
E2- 3

2.2 Connecting the Power Cord

Power Cord
Power Cord
[Example of EU Type]