Turning The Printer On/Off; Turning On The Printer; Turning Off The Printer - Oki LE840 Guia Del Usuario

2. PRINTER SETUP
2.5 Turning the Printer
ON/OFF

2.5.1 Turning ON the Printer

CAUTION!
• Use the power switch to
turn the printer On/Off.
Plugging or unplugging the
Power Cord to turn the
printer On/Off may cause
fire, an electric shock, or
damage to the printer.
• Do not turn on the printer
power while the ON LINE
and ERROR lamp are
blinking as this may cause
damage to the printer.
NOTE:
If a message other than ON
LINE appears on the display or
the ERROR LED lamp is
illuminated, refer to Section 5.1,
Error Messages.

2.5.2 Turning OFF the Printer

CAUTION!
1. Do not turn off the printer
power while the media is
being printed, as this may
cause a paper jam or
damage to the printer.
2. Do not turn off the printer
power while the ON LINE
lamp is blinking as this
may cause damage to
your computer.
When the printer is connected to your host computer it is good practice to
turn the printer ON before turning on your host computer and turn OFF
your host computer before turning off the printer.
1. To turn ON the printer power, press the Power Switch as shown in the
diagram below. Note that ( | ) is the power ON side of the switch.
2. Check that the ON LINE message appears in the LCD Message
Display and that the ON LINE and POWER LED lights are
illuminated.
1. Before turning off the printer Power Switch verify that the ON LINE
message appears in the LCD Message Display and that the ON LINE
LED light is on and is not flashing.
2. To turn OFF the printer power press the Power Switch as shown in the
diagram below. Note that ( ) is the power OFF side of the switch.
E2-13

2.5 Turning the Printer ON/OFF

Power Switch
Power Switch