Loading Supplies - Oki LE840 Guia Del Usuario

2. PRINTER SETUP

2.3 Loading Supplies

1. Do not touch any moving parts, projection and the edge of sheet metal. To reduce the risk of
fingers, jewellery, clothing, etc., being drawn into the moving parts, be sure to load the supplies
once the printer has stopped moving completely.
2. The Print Head becomes hot immediately after printing, allow it to cool before loading the media.
3. To avoid injury, be careful not to trap your fingers while opening or closing the cover.
1. Be careful not to touch the Print Head Elements when lifting the Print Head Block. This may
cause missing dots due to static electricity or other print quality problems.
2. When loading or replacing the media or ribbon, be careful not to damage the print head with hard
objects like watches or rings.
Care must be taken not to allow
the metal or glass part of a watch
to touch the print head edge.
Since the print head element can be easily damaged by shock, please treat it carefully and do not
hit it with hard objects.
WARNING!
CAUTION!
Care must be taken not to allow a
metal object like a ring to touch
the print head edge.
E2- 4
2.3 Loading Supplies