Oki LE840 Guia Del Usuario página 34

2. PRINTER SETUP
2.6.2 Parameter Setting
(Cont.)
(4) PEEL OFF STATUS
Specifies whether the printer sends a strip wait status to the host in
response to a status request command.
 OFF
 ON
(5) USB I/F STATUS
Specifies whether to return a response to the host via USB.
 OFF
Disables sending a response via USB
 ON
Enables sending a response via USB
(6) FEED KEY
Selects the function of the FEED key.
 FEED
Feeds one label.
 PRINT
Prints the data in the image buffer (The last label
printed)
(7) KANJI CODE
Select the KANJI code.
 TYPE1
Windows code
 TYPE2
Original code
(8) EURO CODE
Specifies the Euro code (€).
"20" to "FF" (Specify the hex code in 2 bytes of ASCII code)
(9) AUTO HD CHK
Select whether to perform the auto print head check when the printer
is powered on.
 OFF
Auto print head check is not performed.
 ON
Auto print head check is performed.
E2-20
FF
FE
21
20
2.6 Printer Setting