Oki LE840 Guia Del Usuario página 66

2. PRINTER SETUP
2.9.1 Fine Adjustment (Cont.)
• Example of Print Start Position Fine Adjustment
When setting +3.0 mm
Compared with "+0.0mm" position, the print start
position is shifted forward.
When setting +0.0 mm
When setting –3.0 mm
Compared with "+0.0mm" position, the print start
position is shifted backward.
(1) FEED ADJ.
Print start position is shifted by fine adjusting the feed amount.
50.0mm
49.9mm
-49.9mm
-50.0mm
Feed Direction
Feed Direction
Feed Direction
Do not set the fine adjustment value which is larger than the media
pitch. When the set value exceeds the media pitch, the printer
operation is not guaranteed.
E2-52
2.9 Position and Print Tone Fine Adjustment
One label
Print Start Position
3mm
One label
Print Start Position
3mm
One label
Print Start Position
NOTE: