cecotec bongo A+ Serie Manual De Instrucciones página 30

ENGLISH
Folding
Fig. 27
1. Move the latch vertically upwards to release the folding lever.
2. Move the folding lever.
3. Turn the folding lever downwards and then the stem.
4. Match the folding hook fixing with the rear mudguard and press it downwards to make
sure it is fixed.
Handlebar grips assembly
- The handlebar grips are attached to the handlebars, but they are not mounted.
- Screw each cuff into the corresponding hole until they are securely fastened.
Battery release
Fig. 28
- Unlock the lock on the upper part of the battery.
- Pull the battery upwards.
- Keep the battery up and remove it horizontally.
Battery assembly
- Follow the inverse process described in the previous section.
- Insert the battery in horizontal position by fixing the terminals.
- Push the battery downwards until the lock on the housing is locked into position.
5. OPERATION
5.1. Power and operation
Fig. 29
1. Hold down the power button for 2 seconds.
2. Step on the footrest with one foot and use the other foot to propel yourself to start sliding.
3. Place both feet on the footrest.
4. Press the accelerator with your right hand. The electric motor will deliver power when the
speed of the scooter is 3 km/h or more.
5. Press the accelerator to increase the speed.
Warning
Do not ride too fast.
6. Use the brake to stop or to ride slower. Step on the rear mudguard softly for an easier
braking process.
58 ORIGINAL MANUAL TRANSLATION
7. Get off the electric scooter only when you ride at a very low speed or when you are still.
8. Fold down the stand (item no. 7 - Fig. 23) to park your electric scooter when it is not in use.
Warning
The Bongo Bongo Serie A+ Max 45 Connected model has an APP for Smartphone. Thanks
to Bluetooth connectivity, the scooter can be paired with the mobile phone and display
information and settings.
5.2 driving modes
Control panel
- Power button: hold down this button to turn the electric scooter on and off.
- Function button: press this button to select one of the following modes:
1. Pedestrian mode: the mode indicator on the display will be off. In this mode the scooter
can reach 6 km/h.
2. Comfort mode: the mode indicator on the display will show a white "D". In this mode the
scooter can reach 15 km/h.
3. Sport mode: the mode indicator on the display will show a red "D". In this mode the scooter
can reach 25 km/h.
NOTE:
- Measured with a weight of 80 kg, fully charged battery, flat surface, no inclination, no
wind, and an ambient temperature of approx. 25°C.
- Function button: Press this push button twice to switch on the headlight and tail light. If the
light is off, when the brake is applied, the tail light will come on. If the light is on, when the
brake is applied, the tail lamp will illuminate more brightly.
Configuration menu
If you press and hold the function button and the power button simultaneously, you will
enter the configuration menu. Press the function button to navigate between the different
configuration functions (P0 and P1). Access the desired function by pressing the power button
and toggle between 0 and 1 by pressing the function button. Select the desired setting by
pressing the power button. To return to the initial screen, hold down both buttons. The different
configuration functions are:
1. P0 - Units of measurement: selection of km/h (0) or mph (1). Speed can be measured in
kilometres per hour (0) or miles per hour (1).
2. P1 - Cruise mode: activation (1) and deactivation (0) of cruise speed. Hold the same speed
for 6 seconds to keep the scooter moving at that speed steadily, without the need of
operating the accelerator. To deactivate the cruise mode, operate the accelerator or brake.
ENGLISH
BONGO SERIE A+ MAX 45 CONNECTED 59