Publicidad
Idiomas disponibles
Idiomas disponibles
Attach the Front Wheels & Steering Wheel
1. Slide a #10 washer onto the front axle. Slide a front wheel bushing (shorter plastic
ring) onto the front axle.
2. Slide a normal wheel onto the front axle.
3. Slide a #10 washer onto the front axle.
4. Tighten a M8 nut to the end of
the front axle.
5. Insert the hubcap to the front
wheel.
Repeat for the other front wheel.
6. Fit the steering wheel to the end
of the steering column.
7. Line up the holes on the steering
wheel with the holes on the steering
column, insert the M5x35 machine
screw.
8. Fasten a nut on the opposite end
of the screw with a screwdriver.
9. Plug the connector on the car
body into the connector on the
steering wheel.
16
Attach the Exhaust Pipe & Connect the Power
1. Fit the exhaust pipe into the hole on
the right side of the vehicle body, push
Front Bottom View
until you hear it clicks into place.
2. Plug the red connector on the vehicle
body into the red of the battery.
Insert the warning light and
connect the wires to connect
all the wires underneath.
Rear Top View
17
Publicidad
