Publicidad
9 9
Fill the holes 1/4 to 1/2 full with GLUE.
J
G
15F
Fill the holes in the ENDS (A and B) 1/4 to 1/2 full with GLUE (8M). Then, insert a WOOD DOWEL (15F) into these holes. Wipe
away the excess GLUE.
Fill the large holes in the FEET (I and J) 1/4 to 1/2 full with GLUE (8M). Quickly, flip the FEET over and insert the WOOD
DOWELS (15F) in the ENDS into the holes in the FEET. Wipe away the excess GLUE.
Fasten the FEET (I and J) to the ENDS (A and B). Use four BLACK 9/16" LARGE HEAD SCREWS (1S) through the CORNER
BRACKETS (31G) and into the FEET.
Fasten the SKIRT (G) to the BOTTOM (D). Use two BLACK 9/16" LARGE HEAD SCREWS (1S) through the METAL
BRACKETS and into the SKIRT.
Page 14
I
D
31G
www.sauder.com/services
B
8M
Caution
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
A
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S
415107
Publicidad
