Publicidad
17
17
Roller end
1
2
3
Insert a SLIDE CAM (10A ) into the DRAWER SIDES (D132 and D138).
Fasten a DRAWER RIGHT (35GC) to the RIGHT DRAWER SIDE (D132) and a DRAWER LEFT (35GD) to the LEFT DRAWER
SIDE (D138). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
Fasten the PULL (53K) to the DRAWER FRONT (L). Use two SILVER 5/8" MACHINE SCREWS (15S).
Page 22
10A
D138
53K
www.sauder.com/services
SILVER 5/8" MACHINE SCREW
(2 used in this step)
L
3S
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
15S
Screw head - turn CAM to
line up holes in SLIDES with
holes in DRAWER SIDES.
10A
D132
Roller end
1
2
3
415107
Publicidad
