Publicidad
16
16
1
The tabs should insert freely into the slots.
Gently tilt the DRAWER SIDES side to
side until the tabs slip into the slots.
D132
Groove
Insert the DRAWER SIDES (D132 and D138) at an angle into the
slot at each end of the DRAWER FRONT (L).
3
L
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (O) to the DRAWER FRONT (L).
Tighten one HIDDEN CAM.
415107
D138
L
Maximum
Arrow
210 degrees
Minimum
190 degrees
O
www.sauder.com/services
VIEW THE T-LOCK BOX VIDEO
With the palm of your hand, tap the
DRAWER BOTTOM down into the groove.
2
D989
U N
F I
N I
D132
L
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D989) into the grooves in the
DRAWER SIDES (D132 and D138) and DRAWER FRONT (L).
Start each screw a few turns before
4
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D183
D132
O
Fasten the DRAWER BACK (D183) to the DRAWER
SIDES (D132 and D138) and DRAWER BRACE (O). Use five
BLACK 1-9/16" FLAT HEAD SCREWS (30S).
S H
E D
D138
30S
(5 used in this step)
D138
Page 21
Publicidad
