Publicidad
10
10
Surfaces without
CAM SCREWS
15F
J
10E
12E
Fasten the SHELF MOLDING (M) to the SHELF (E). Tighten three HIDDEN CAMS.
Fill the holes in the BOTTOM MOLDING (N) 1/4 to 1/2 full with GLUE (8M). Then, insert a WOOD DOWEL (15F) into these
holes. Wipe away the excess GLUE.
Fill the two outer holes in the BOTTOM (D) 1/4 to 1/2 full with GLUE (8M).
Insert the WOOD DOWELS (15F) in the BOTTOM MOLDING (N) into the holes in the BOTTOM (D). Wipe away the
excess GLUE.
Fasten the BOTTOM MOLDING (N) to the BOTTOM (D). Tighten three HIDDEN CAMS.
Push two FOOT CAPS (10E) onto the FEET (I and J). With a hammer, tap two TACK GLIDES (12E) through the holes of the
FOOT CAPS (10E).
415107
Caution
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
N
D
I
10E
www.sauder.com/services
M
E
15F
8M
Fill the holes 1/4 to 1/2 full with GLUE.
Page 15
Publicidad
