Publicidad
Idiomas disponibles
Idiomas disponibles
3. INSTALLATION INSTRUCTIONS
REMOVING THE OVERLAY PANEL MECHANISM
COVERS
• Remove the upper screws to remove the upper
cover.
WARNING:
There is a magnet on the cover door hanger
bracket. This is a functional component for
product operation, because it activates the
door open reed switch. Please ensure the
covers do not get switched; put each back
on the same bracket it was removed from.
The magnet should not be switched with
the lower cover.
• Remove the two screws to remove the door
hanger bracket for the lower mechanism cover.
38
REMOVING THE PANEL BRACKETS
• Remove the upper and lower adjustable panel
mounting brackets from the fridge door panel
adjustment mechanisms, as shown below.
• Remove the covers for the panel adjustment
mechanisms from the lower part of the freezer
door along with the panel mounting brackets.
Publicidad
