3. INSTALLATION INSTRUCTIONS
• Attach the decorative side trim seals (#2) and
(#3). Note: side trim pieces may require some
trimming if gap is too small to allow them to be
pushed in; some force may be required. Remove
the protective film from the double-sided tape
to secure the trim to the front face of the fridge
cabinet.
48
Double-sided tape
3.6 Hinge Adjustment and Reversing
the Door Swing
ADJUSTING THE SPRING TENSION OF THE HINGES
• Use a drill to adjust the tension of the upper and
lower hinges of the fridge door. Set the hinge
adjustment screw to position "I" from position
"O".
WARNING:
The door must be fully open during this
adjustment.
WARNING:
The hinge tension adjustment must be