1. IMPORTANT INFORMATION
1.1 Symbols and Their Meanings
Symbols used in the installation manual are as
follows.
Note
Important information or useful tips for use
Warning
Conditions that may damage the product or
affect its operation
Caution
Situations entailing a serious risk of injury
1.2 Disposing of the packing materials
The packing materials have been designed to
protect the product during transport.
The packing materials used for the product are not
harmful to the environment when disposed of and
they need to be recycled.
All plastic packing materials, bags, etc. must be
disposed of safely and kept out of the reach of
children.
Please return the packing materials to your dealer.
WARNING:
This installation manual is intended to
aid installation teams. The User Manual
provided with the product must also be
taken into account.
You may be seriously injured and your
product damaged if you ignore the warnings
provided in this manual. Please read the
following carefully.
WARNING:
R600a Refrigerant
This product contains R600a isobutane
refrigerant, which is a very eco-friendly
natural gas. However, it is also flammable.
Please heed the warnings below:
• If the product has been transported
horizontally, you must wait for a minimum
of 4 hours before plugging it in.
• The following instructions must be
followed during installation:
• The dimensions of the installation area
must be adequate.
• The dimensions, features and position of
the object used to support and secure the
product in said area must be suitable.
• Minimum clearances between product
parts and surrounding structures must
be adequate.
• Minimum
dimensions
positioning of ventilation holes must be
heeded.
• The product must be connected to a
non-GFCI protected dedicated circuit,
and there must be a suitable water line
connection (for models with ice maker
and water dispenser).
• The product must be able to be
disconnected from the power supply
after installation.
• The socket or fuse must be accessible,
so as to be able to shut off power to the
product.
• Extension cords and ungrounded (two-
prong) adapters may not be used.
CAUTION:
You must wear protective gloves and eye
protection when installing the product.
You must also wear hearing protection
when using a drill or similar tools.
CAUTION:
Make sure that the electrical circuit is
suitable for the product.
CAUTION:
The product must be installed by a qualified
technician according to the installation
instructions.
WARNING:
The product may tip over, because it is
quite heavy. Precautions must be taken to
prevent this from occurring.
The product's doors must be kept closed
until it reaches its destination; it must be
transported in the manner described in the
installation instructions.
EN
and
proper
5