USER MAINTENANCE
Downloaded from:
https://www.usersmanualguide.com/
LENS COVER
open/close switch
Set to "POWER OFF".
BATT. RELEASE
EJECT
PUSH
Remove.
Marks
After Use
1
Set the power switch to POWER OFF to turn off the
camcorder.
2
Slide EJECT to open the cassette holder, then remove
the cassette.
3
Close and lock the cassette holder by pressing
PUSH.
4
Press BATT. RELEASE to remove the battery pack.
5
Slide the LENS COVER open/close switch to close
the lens cover.
Cleaning The Camcorder
CLEAN EXTERIOR
1
Wipe gently with a soft cloth.
CLEAN LENS
2
Blow it with a blower brush, then wipe gently with
lens cleaning paper.
REMOVE EYEPIECE
3
Turn the eyepiece counterclockwise and pull it out.
CLEAN VIEWFINDER
4
Remove dust using a blower brush.
RE-ATTACH EYEPIECE
5
Align the marks, re-attach the eyepiece and turn it
clockwise.
NOTES:
● Avoid using strong cleaning agents such as benzine or
alcohol.
● Cleaning should be done only after the battery pack
has been removed or other power units have been
disconnected.
● Mold may form if the lens is left dirty.
35