Descargar Imprimir esta página

JVC DT-V1710CG Instrucciones página 20

Monitor multiformato
Ocultar thumbs Ver también para DT-V1710CG:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

HOW TO USE "SETUP MENU"
PICTURE SUB ADJ.
Controls the approximate adjustment of the video
control level when the video adjustment knob is
adjusted to the center.
• Can also be used to switch the NTSC set-up level, and
change the component signal's input level settings.
Press the
button to
display the setting menu
illustrated on the right.
NOTE :
When the RGB signal is input, only
CONTRAST and BRIGHT are
displayed. When the PAL signal is
input, only CONTRAST, BRIGHT
and CHROMA are displayed.
CONTRAST
• –20 ~ 00 ~ +20
BRIGHT
• –20 ~ 00 ~ +20
CHROMA
• –20 ~ 00 ~ +20
PHASE
• –20 ~ 00 ~ +20
NTSC SETUP
Sets the set-up level of the input NTSC signal.
00 : Compliant with 0% set-up signal.
7.5 : Compliant with 7.5% set-up signal.
NOTE :
NTSC SETUP is displayed only when the video input card is
installed and an NTSC signal is input.
COMPO. LEVEL
Sets the set-up level of the input component signal.
SMPTE : Compliant with M2VTR signals.
B75
: Compliant with Betacam 7.5% set-up signal.
B00
: Compliant with Betacam 0% set-up signal.
NOTE :
COMPO. LEVEL is displayed only when a 480/60i, 480/60p, 576/
50i or 576/50p signal is input.
20
<PICTURE SUB ADJ.>
CONTRAST
: 00
BRIGHT
: 00
CHROMA
: 00
PHASE
: 00
NTSC SETUP
: 00
COMPO.LEVEL
:SMPTE
sub menu
reset
EXIT:
ADJUST:- + SELECT:
MENU
COLOR TEMP./BAL.
Sets or adjusts the color temperature or white
balance.
Press the
button to
display the setting menu
illustrated on the right.
• Use the five items indicated with
mark to make fine adjustments
between the monitors.
COLOR TEMP.
Selects the color temperature.
HIGH : Sets the color temperature to 9300.
LOW : Sets the color temperature to 6500.
BLUE DRIVE
Adjusts the blue drive level.
• MIN ~ 000 ~ MAX (in 127 grades)
RED DRIVE
Adjusts the red drive level.
• MIN ~ 000 ~ MAX (in 127 grades)
GREEN CUTOFF
Sets the green cut-off point.
• MIN ~ 000 ~ MAX (in 205 grades)
BLUE CUTOFF
Sets the blue cut-off point.
• MIN ~ 000 ~ MAX (in 205 grades)
RED CUTOFF
Sets the red cut-off point.
• MIN ~ 000 ~ MAX (in 205 grades)
(cont'd)
<COLOR TEMP./BAL.>
COLOR TEMP.
:LOW
BLUE DRIVE
: 000
RED DRIVE
: 000
GREEN CUTOFF
: 000
BLUE CUTOFF
: 000
RED CUTOFF
: 000
sub menu
reset
EXIT:
MENU
ADJUST:- + SELECT:

Publicidad

loading

Este manual también es adecuado para:

Dt-v1910cgDt-v1710cg/uDt-v1710cg/e