Denver TVD-1438 MPEG 4 Manual Del Usuario página 13

If item Program is selected , activation of V+ / V- keys will increase/decrease the program
number entry. It can also be done by direct digit keys (Key 0 to 9 on remote handset).
When item Store is selected and OK key is pressed ,the existing tuning information along
with AUTO colour standard and sound standard (based on sound carrier strength level)
will be stored in the Program number entered in item PROGRAM and OK display will
appear beside item Store.
15.3 SETUP MENU
TIMER SUBMENU :
The Timer submenu has following items :
a) Time _ _ : _ _
b) On Timer _ _ : _ _
c) Off Timer _ _ : _ _
d) On Timer Pr_ _
Sub-menu is accessed using OK key.
For items (a) to (c) the V- key is used to change the hour (0 to 23) and V+ Key to change
minutes (0 to 59 ) . For item (d) V- key is used to decrement On Timer Program number
and V+ key is used to increment On Timer Program number(0 to 99).
The On/Off Timer and Program number will be disabled when the TV set is Power on.
However, these setting will keep on when TV in Standby mode.
Auto ShutOff Timer :
When no Front end IDENT (from RF) is detected for APP. 5 minutes, the set will switch to
standby automatically .
ORGANIZE SUBMENU :
EN 12