Denver TVD-1438 MPEG 4 Manual Del Usuario página 9

program 23 , press key --/- to see -- on the screen , then press 2 and within 2 seconds of pressing 2 ,
press key 3. If key 3 is not pressed within 2 seconds the program accessed is program number 2.
AV key
6
Select external video to view. Press the button once to viewing program from AV1 (AV
SCRAT Full Scart) and AV2 (Video, Audio).
7 CH+/CH- key
Press CH+ to select the stations upward and CH- to select downwards, program
number will be displayed for 4 sec. When Teletext is active, these keys increase or
decrease the current teletext page.
8
9 MUTE key
Press to switch off the sound temporarily. The mute sign will be displayed. Press again to recover
the sound from mute.
10 STATUS key
Press to view present program number, system, Status display will last for 4 sec.
11 SLEEP key
The set will switch OFF if the sleep timer expires . The Sleep timer can be
set in steps of 10 minutes with a maximum of 120 minutes.
12
RECALL key
Press it for the first time to view the previous program. Press it for the second time to
return the present program.
13 P.P. key
The TV picture can be adapted to suit the current lighting conditions. Press
Successively to select the desired settings. The same key is used in TXT.
Soft
STANDARD, SOFT and DYNAMIC are preset values of Brightness, Contrast and
V+/V- key
Press the V+ or V- to set the sound level higher or lower, volume bar will be
displayed.
Dynamic Favourite Standard
EN 8