Emerson RAH ECO Manual página 5

3.1
Remove and discard the Cardboard Shipping Retainers
from the Fan Motor Assembly (Figure 1).
3.2
NOTE: Be sure NOT to loosen or remove the Green
Ground Wire Screw.
Remove the Hanger Ball by loosening the Phillips Head
Set Screw in the Hanger Ball until the ball falls freely down
the Downrod (Figure 2).
Remove the Pin from the Downrod, then remove the
Hanger Ball (Figure 2).
Retain the Pin and Hanger Ball for reinstallation in
Step 3.9.
3.3
Separate, untwist and unkink the two 80" Motor Leads.
Route the two 80" Black and White Motor Leads through
the Downrod (Figure 3).
3. Ceiling Fan Assembly
5
Figure 1
PIN
HANGER BALL
PHILLIPS HEAD SET SCREW (LOOSENED)
Figure 2
TWO 80" MOTOR
LEADS (UNTWISTED)
Figure 3
Please contact 1-800-654-3545 for further assistance
FAN MOTOR
ASSEMBLY
CARDBOARD
SHIPPING
RETAINERS (2)
GREEN GROUND WIRE
GREEN GROUND
WIRE SCREW
8" DOWNROD
DOWNROD
emersonfans.com
U.L. Model No.: CF915