Stihl FSA 90 R Manual De Instrucciones página 11

Ocultar thumbs Ver también para FSA 90 R:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Check contacts in battery compartment
for foreign matter. Keep clean.
Fit the battery correctly – it must engage
audibly.
For specific starting instructions, see the
chapter "Switching On" in the manual.
WARNING
Your power tool is a one-person
machine. Do not allow other persons in
the general work area, even when
starting.
During Operation
Holding and Controlling the Power Tool
Always hold the unit firmly with both
hands on the handles while you are
working. Wrap your fingers and thumbs
around the handles.
WARNING
To reduce the risk of injury from loss of
control, never work on a ladder or on any
other insecure support. Never hold the
cutting attachment above waist height.
Right-Handers and Left-Handers
Right hand on the control handle and left
hand on the loop handle.
FSA 90 R
WARNING
Never attempt to operate
your power tool with one
hand. Loss of control of
the power tool resulting in
personal injury may
result. To reduce the risk
of cut injuries, keep
hands and feet away
from the cutting attach-
ment. Never touch a
moving cutting attach-
ment with your hand or
any other part of your
body.
WARNING
Do not overreach. Keep proper footing
and balance at all times. Special care
must be taken in slippery conditions and
in difficult, overgrown terrain. Watch for
hidden obstacles such as tree stumps,
roots and ditches to avoid stumbling. For
better footing, clear away fallen
branches, scrub and cuttings. Be
extremely cautious when working on
slopes or uneven ground.
Working Conditions
Operate your power tool only under
good visibility and daylight conditions.
Work carefully.
WARNING
If the vegetation being cut or the
surrounding ground is coated with a
chemical substance (such as an active
pesticide or herbicide), read and follow
the instructions and warnings that
accompanied the substance at issue.
WARNING
Inhalation of certain dusts, especially
organic dusts such as mold or pollen,
can cause susceptible persons to have
an allergic or asthmatic reaction.
Substantial or repeated inhalation of
dust and other airborne contaminants, in
particular those with a smaller particle
size, may cause respiratory or other
illnesses. Control dust at the source
where possible. Use good work
practices, such as operating the unit so
that the wind or operating process
directs any dust raised by the power tool
away from the operator. Follow the
recommendations of EPA / OSHA /
NIOSH and occupational and trade
associations with respect to dust
("particulate matter.") When the
inhalation of dust cannot be
substantially controlled, i.e., kept at or
near the ambient (background) level, the
operator and any bystanders should
wear a respirator approved by NIOSH /
MSHA for the type of dust encountered.
Operating Instructions
WARNING
In the event of an emergency, switch off
the motor immediately, move retaining
latch to ƒ and remove the battery.
WARNING
The cutting attachment
continues to rotate for a
short period after the trig-
ger switch is released
(flywheel effect.)
English
9

Publicidad

Tabla de contenido
loading

Tabla de contenido