2
4
Push down the trigger switch
N
lockout (3) and depress the trigger
switch (4) and hold them in that
position.
The motor runs only if the retaining
latch (2) is on ‚ and the trigger switch
lockout (3) and trigger switch (4) are
operated simultaneously.
FSA 90 R
Switching Off
3
Release the trigger switch
N
lockout (1) and the trigger
switch (2).
Move the retaining latch (3) to ƒ –
N
the trigger switch (2) cannot be
operated – the power tool is locked
to prevent start-up.
Remove the battery from the power tool
during breaks and after finishing work.
1
2
3
2
Removing the Battery
4
4
Press in both locking tabs (4) at the
N
same time to unlock the battery (5).
Take the battery (5) out of the
N
housing.
When the power tool is not in use, store
it so that it does not endanger others.
Secure it against unauthorized use.
English
23