24 | ORBEA
HEADSET EXPLODED PA RTS AND ASSEMBLY
BEARINGS AND SIC ADAPTER
SEE THE LIST OF COMPONENTS
AT THE END OF THIS SECTION
2
1.1
3
1.1
1.2
Starnut
Fork´s steerer tube
TECHNICAL MANUAL
BLUE PAPER OIZ CARBON O M X-O M R · 2 02 3
"REGULAR STACK" AND "LOW STACK"
HEADSET SETS (OPTIONAL)
The HS02 headset allows for two different assemblies
ferred stem and handlebar height.
REGULAR STACK
(4) and SIC cabling collector (6).
The headset spacers to be used below the stem (5.1, 5.2)
are mounted between the frame cover and the collector to
achieve the desired stem height.
The headset spacers to be used on top of the stem (8.1,
GREASE
LOW STACK
that acts as a frame cover (9).
This collector is not compatible with the use of steering
spacers below the stem (5.1, 5.2) .
The headset spacers to be used on top of the stem (8.1,
-
sets are only compatible with the use of OC
stems compatible with the Spinblock func-
tion. (see Spinblock section in this chapter).
ORBEA | 25
E N
-