Publicidad
Idiomas disponibles
Idiomas disponibles
38 | O RB EA
1 2 C H A I N GU ID E
The Oiz Carbon chainguide is fixed to the internal thread
of the pivot point axle of the swingarm.
Adjust the angle and height of the chainguide for optimal
positioning depending on the chainring mounted.
2
4 N.m
3
3 N.m
21
OI Z 2 3 CH AI N G UI D E K I T
PART NO.: XC69
Oiz Carbon 23 chainguide kit
Always use the tightening torque
recommended by Orbea.
21
Q UA N T.
1
T EC HN I CAL M A NUAL
B LU E PA P E R OI Z CAR B O N O M X-O M R · 2 0 2 3
13 B OTTOM BRACKET SPACE R
SHIMANO FC-M8100/FC-M7100 CRANKSETS
In order to mount the Shimano XT FC-
M8100 crankset (specificated on Orbea Oiz
M10 2023 models) or the Shimano SLX FC-
M7100 crankset with 52mm chainlines on
Oiz Carbon 2023, it is necessary to replace
the 2.5mm BB spacer provided with compat-
ible bottom brackets for the Orbea 3.25mm
BB spacer (X915) between the frame and the
right BB cup (already installed on Orbea as-
semblies with these cranksets).
If a 2.5mm spacer is used on this crankset
models and their respective chainrings (SM-
CRM85 or SM-CRM75), there is risk of inter-
ference between the back of the chainring
and the right chainstay.
Shimano 2.5mm BB spacer
DO NOT USE
BB SPAC E R 3 . 25 mm C L 52
PART NO.: X915
If you replace the bottom bracket cups on Oiz Carbon
2023 models equipped with these Shimano cranksets, re-
place the 2.5mm spacer provided with the new BB cups
with the Orbea 3.25mm spacer originally assembled on
the bicycle.
If you install any of these cranksets and their respecti-
ve chainrings on Oiz Carbon 2023 models that did not
equip these components originally, you can purchase the
3.25mm spacer from an Orbea dealer (X915).
When installing these cranskets on Oiz Carbon 2023 mo-
dels, check that the back of the chainring does not interfe-
re with the right chainstay before using the bicycle.
Orbea 3.25mm BB spacer
Shimano SM-CRM85
Shimano SM-CRM75
Shimano FC-M8100
Shimano FC-M7100
QUANT.
BB spacer 3.25mm CL52
1
O RB EA | 3 9
E N
Publicidad
