Orbea BLUE PAPER OIZ CARBON Manual De Instrucciones página 32

62 | ORBEA
M OU NT ING AND ADJUST I N G T HE CA BL E TEN SIO N
FIXING AND ADJUSTING THE CABLE TENSION
OF THE FORK AND SHOCK REMOTE
01. Install the 4mm metal Jagwire housing stops on the
shock and fork cable housings.
02.
TECHNICAL MANUAL
0
BLUE PAPER OIZ CARBON O M X-O M R · 2 02 3
04. Adjust later using the cable tensioning screws.
03. Mount both cables, making sure that the end is positioned in
its housing.
Fix the other end of the cable to the fork regulator or to the frame
shock absorber pulley.
* Do not cross the remote cables in the channel.
Cable tensioning screw
ORBEA | 63
E N