Orbea BLUE PAPER OIZ CARBON Manual De Instrucciones página 26

50 | ORBEA
HANDLEBAR ASSEMBLY
ON OC ST-MP10 STEM
To allow the handlebar to be mounted on the OC ST-MP10
stem with integrated faceplate, and to avoid aesthetic
damage to the handlebar when inserting the handlebar
into the stem, the stem has a spacer installed in the lower
part, which opens the clamping area to allow the handle-
bar to be inserted into the stem.
Without removing the spacer from the stem, install the
handlebar onto the stem and centre it in the desired posi-
tion. Then remove the spacer from the bottom of the stem.
4
4
5 N.m
5 N.m
TECHNICAL MANUAL
Save the spacer for future use if you need to replace the
handlebar.
BLUE PAPER OIZ CARBON O M X-O M R · 2 02 3
OC ST- MP 21 STE M
B
OC RANGE
MATERIAL
Ø FORK
Ø HANDLEBAR (C)
MOUNTING HEIGHT IN FORK TUBE
ANGLE (B)
AVAILABLE LENGTHS (A)
INTERNAL CABLING
SPINBLOCK FUNCTION
SIC COMPATIBLE
HEADSET STANDARD COMPATIBILITY
WEIGHT
STEM TOPCAP
STEM TOP SPACERS
STEM BOTTOM SPACERS
COMPUTER MOUNT (Optional)
A
C
Mountain Performance
CNC Aluminium
31.8 mm
32 mm
-6º
60 mm - 75 mm - 90 mm
No
Yes
Yes
Orbea HS02
155 g (75 mm)
HS02-30 Topcap. ST-MP10/21
HS02-08 10/5 mm Spinblock stem top spacer
HS02-04/03 10/5 mm split headset spacer
Beneath SIC HS02 headset collector
OC CM-04 XC HS02. On stem. 5 mm ISS02 interface
ORBEA | 51
E N