Descargar Imprimir esta página

Foppapedretti Pitstop i-Size Manual De Instrucciones página 40

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67
☞ SUGGESTION: The ISOFIX anchoring points are located between the seat and the
backrest of the passenger seat.
Press both sides of the adjustment/release button on the ISOFIX connectors
simultaneously and extend the ISOFIX connectors (fig. 7).
Locate the ISOFIX attachments supplied with the vehicle.
Align the ISOFIX connectors with the anchoring points fixed to the vehicle passenger
seat and press until you hear a "click" (fig. 8). The indicator on both brackets will turn
green, confirming that they have attached. (fig.9).
Ensure that both brackets are correctly fastened. Shake the car seat to be sure it is
correctly fixed in place.
Push the car seat against the passenger seat, making sure that both ISOFIX connectors
are extended in the same position. There must not be any space between the backrest
of the passenger seat and the car seat (fig. 10).
Grasp the Top Tether belt and, if necessary, lengthen the strap by pressing the
appropriate locking button, extending it to the desired length (fig.11).
Attach the upper fixing device of the "Top Tether" to the anchoring point indicated in
the vehicle user manual (fig. 12). Check that this icon is present inside the passenger
compartment.
Tighten the Top Tether belt until the indicator turns green (fig. 11). This indicates that
the belt is tightened correctly. The Top Tether belt must pass over the backrest of the
vehicle passenger seat, it must never pass over the headrest. If necessary, lift up or
remove the headrest from the passenger seat.
ROLL UP THE EXCESS TOP TETHER BELT AND HIDE IT AWAY, TO PREVENT YOUR
CHILD FROM PICKING IT UP AND PLAYING WITH IT, AS IT COULD BE EXTREMELY
DANGEROUS.
ATTENTION
If the Top Tether anchoring strap has been correctly attached and
tightened, the indicator will turn green.
Press the adjustment button and at the same time grip the straps (chest belts) at the
bottom, under the pads of the chest protectors, and pull them forwards to loosen them
(fig. 14).
IMPORTANT: Do not pull on the shoulder pads.
See paragraph "Adjusting the seat belt (harness)".
• ENGLISH •
USE IN THE VEHICLE
40

Publicidad

loading