Publicidad
Idiomas disponibles
Idiomas disponibles
4. ADJUSTING THE HEIGHT OF THE LEGS AND WHEELS
1. Press the push button to release the foot or wheel
2. Slide the tube to adjust to the desired height
3. The height of the foot or wheel is correctly locked when you hear a "click".
4. Make sure both legs and wheels are at the same height before use
5. FIXED OR ARTICULATED FUNCTION
Fixed motion function: Allows both wheels of the rollator to move
forward at the same time.
Press the push button to place it in the upper hole. The walking frame
is correctly attached when you hear a "click".
Articulation function: Allows the two wheels of the rollator to move
forward alternately.
Press the push button to place it in the lower hole. The walking frame
is correctly attached when you hear a "click".
USE:
To use the walking frame place your forearms on the brachial supports and your hands on the handles. Adjust the height if
necessary. Move forward slowly.
CARE AND MAINTENANCE
Failure to care for and monitor your product may result in the risk of serious injury.
•
Clean the rollator regularly with warm water and a soft cloth. Do not use abrasive products, detergents or solvents.
•
Dry with a clean, dry soft cloth.
•
Make sure there is no accumulation of dirt or debris around the axle, brakes or wheels.
•
Do not use cleaning products containing phenol or chlorine, as this could damage aluminium and polyamide materials.
•
Lubricate the wheels with a little oil if they squeak.
•
Periodically check the wear and strength of all screws and bolts. Replace all broken, damaged or worn parts immediately.
•
Check that the brakes are working before each use.
•
Check the parking brakes by pushing the handles into the locked position, then trying to push the rollator.
•
If there is a malfunction, do not repair the rollator yourself. Consult an authorized dealer.
CHANGE OF OWNERSHIP
The product can be reused. It must first be cleaned and disinfected in accordance with hygiene instructions. When transferring
your product, remember to hand over all the necessary technical documents to the new user. Beforehand, the product must be
inspected by an authorised specialist.
Version Mai 2023
8
Publicidad
