Descargar Imprimir esta página

Parkside 353260 2007 Traduccion Del Manual De Instrucciones Originale página 59

Taladradora-lijadora de precisión

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ROTARY TOOL PFBS 160 B2
Introduction
Congratulations on the purchase of your new
appliance . You have chosen a high-quality product .
The operating instructions are part of this product .
They contain important information about safety,
usage and disposal . Before using the product,
please familiarise yourself with all operating and
safety instructions . Use the product only as
described and for the range of applications speci-
fied . Please also pass these operating instructions
on to any future owner .
Intended use
This precision drill grinder (hereafter also referred
to as the "appliance") is intended for drilling,
milling, engraving, polishing, cleaning, grinding,
cutting of wood, metal, plastics, ceramics and stone
in dry rooms . Any other uses of or modifications to
the machine are deemed to be improper usage
and may result in serious physical injury . Not for
commercial use .
Features
Rotary tool
ON/OFF switch
Power cable
Bracket
Ventilation slits
Union nut
Tensioning nut
Collet chuck 3 .2 mm (pre-assembled)
Grip ring with LED light
Spindle lock button
Carbon brushes
Infinitely variable speed control
56
 GB │ MT
Accessories (see fig. A)
Locking screw
Router cage
Flexible shaft
Union nut (flexible shaft)
14b
Spindle lock (flexible shaft)
Stand mount
Stand
Clamping assembly
Accessories set, 42 pieces (see fig. B)
6 cutting discs (max . 40000 rpm)
2 grinding discs, abrasive (max . 40000 rpm)
1 whet stone
3 polishing attachments (max . 20000 rpm)
5 abrasive belts (max . 40000 rpm)
1 abrasive belt mandrel
1 combination spanner
1 collet chuck 2 .4 mm
1 metal brush (max . 15000 rpm)
2 plastic brushes (max . 15000 rpm)
1 mandrel for cutting/grinding discs
1 drill bit (max . 20000 rpm)
1 milling bit (max . 40000 rpm)
1 mandrel for polishing attachments
2 engraving bits (max . 40000 rpm)
5 grinding bits, abrasive (max . 40000 rpm)
8 cutting discs (max . 40000 rpm)
ON/OFF switch LED light
WARNING!
Never exceed the specified maximum rota-
tional speed (see section: "Notes on working
with materials/tools/speed range") .
PFBS 160 B2

Publicidad

loading

Este manual también es adecuado para:

Pfbs 160 b2