Integrated Cleaning Programme; On/Off Button - melitta CAFFEO SOLO&milk Manual De Instrucciones

Ocultar thumbs Ver también para CAFFEO SOLO&milk:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 163

Integrated Cleaning programme

the Integrated cleaning programme removes residues, including coffee oil residues,
that cannot be eliminated by hand. It takes a total of approximately 15 minutes.
Prerequisite: The appliance must be switched off.
Caution!
Run the integrated cleaning programme every 2 months or after approx-
imately 200 brewed cups of coffee, at the latest however run the pro-
gramme when the symbol for cleaning
Only use Melitta
are precisely matched to the Melitta
ing agents can damage the appliance.
Run the Integrated cleaning programme as follows:
Phase 1
During Phase 1, no bean symbols are shown on the display.
1 Pull the water reservoir up and out of the appliance. Fill the water reser-
voir to the Max. mark with fresh tap water and re-insert it.
2 simultaneously press the button for coffee dispensing

On/Off button

the cleaning symbol
the symbol for the drip tray
3 empty the drip tray and the coffee grounds container.
4 Re-insert the drip tray without the coffee grounds container and place the
coffee grounds container under the outlet.
Phase 1 is completed.
cleaning tabs for automatic coffeemakers. these tabs
®
®
for longer than 2 seconds.
will flash throughout the operation.
will be illuminated.
is illuminated in the display.
sOLO
&milk. use of other clean-
use of other clean-
®
and the
71

Publicidad

Tabla de contenido
loading

Tabla de contenido