Inserting And Removing The Battery; Inserting The Battery; Removing The Battery - Stihl GTA 26 Manual De Instrucciones

Ocultar thumbs Ver también para GTA 26:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

14 Inserting and Removing the Battery

► Apply STIHL Multioil Bio in the area (1) between the guide
bar and saw chain.
► Insert the battery.
► Switch on the garden pruner for a few seconds.
The oil is dispersed on the saw chain.
14 Inserting and Removing the Battery

14.1 Inserting the Battery

WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 7. Never use or store the battery at
ambient temperatures below - 4 °F (- 20 °C) or above
122 °F (50 °C), @ 7.
WARNING
To reduce the risk of unintended activation, never store the
battery in the garden pruner, @ 20.2.
To insert the battery:
► Push the battery (1) into the battery compartment (2) until
it stops.
The battery is properly inserted when you hear an audible
click.
Since a new battery is not fully charged, STIHL recommends
that you fully charge the battery before using it the first time,
@ 11.
0458-694-8621-A
2
1

14.2 Removing the Battery

WARNING
To reduce the risk of severe personal injury from unintended
activation, always remove the battery before assembling,
transporting, adjusting, cleaning, servicing, maintaining or
storing the garden pruner and any other time it is not in use.
WARNING
Use care when ejecting the battery to prevent it from falling
and causing personal injury or property damage.
To remove the battery:
► Release the trigger switch.
1
► Press down the locking hooks (1) on both sides and pull
out the battery (2).
NOTICE
Avoid exposing the battery to excessive heat or prolonged
periods of direct sunlight. Use or storage outside the
recommended ambient temperature range can reduce the
performance and/or service life of the battery.
English
2
27

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido