Publicidad
Idiomas disponibles
Idiomas disponibles
12
TROUBLESHOOTING
Problem
Possible
Cause
The ma-
No electrical
chine
contact be-
does not
tween the ma-
start
chine and the
when you
battery pack.
push the
trigger.
The battery
pack is deple-
ted.
The lock-out
button and trig-
ger are not
pushed at the
same time.
English
Solution
1. Remove battery
pack.
2. Check contact and
install the battery
pack again.
Charge the battery
pack.
1. Pull the lock-out
button and hold it.
2. Pull the trigger to
start the machine.
Problem
Possible
Cause
The ma-
The guard is
chine
not attached to
stops
the machine.
when you
Heavy cutting
cut.
line is used.
The grass
winds around
the motor shaft
or the trimmer
head.
The motor is
overloaded.
The battery
pack or ma-
chine is too hot.
The battery
pack is discon-
nected from the
tool.
The battery
pack is deple-
ted.
13
Solution
Remove the battery
pack and attach the
guard to the machine.
Use only with the
nylon cutting line of
.0080" (2 mm) diame-
ter.
1. Stop the machine.
2. Remove the battery
pack.
3. Remove the grass
from the motor shaft
and trimmer head.
1. Remove the trim-
mer head from the
grass.
2. The motor will re-
cover to work as soon
as the load is re-
moved.
3. When you cut,
move the trimmer
head in and out of the
grass to be cut and
remove no more than
8" in pass.
1. Cool the battery
pack until its function
returns to normal.
2. Cool the machine
for approximately 10
minutes.
Install the battery
pack again.
Charge the battery
pack.
EN
Publicidad
