Publicidad
Idiomas disponibles
Idiomas disponibles
ALWAYS ENSURE YOU ARE USING THE LATEST REVISION OF YOUR 3M INSTRUCTION MANUAL. VISIT
WWW.3M.COM/USERINSTRUCTIONS OR CONTACT 3M TECHNICAL SERVICES FOR UPDATED INSTRUCTION
MANUALS.
PRODUCT OVERVIEW:
Figure 1 illustrates the 3M™ DBI-SALA® Ladder Anchor. The Ladder Anchor is a single point anchorage connector for a personal
fall arrest system designed to be attached to a fixed metal ladder on a structure.
Figure 2 illustrates components of the Ladder Anchor. See Table 1 for Component Specifications. The Ladder Anchor is comprised
of the Anchor Weldment (A), which serves as the body of the Fixed Beam Anchor. The Ladder Fasten Points (B) enable the
Fixed Beam Anchor to be secured to a ladder with the applicable hardware kit. The Tube Cap (C) keeps water out of the
Weldment and the Connection Eye (D) enables connection of a Self Retracting Device (SRD) to the Fixed Beam Anchor. The
Bolt Cap (E), Rung Hook (F), U-Bolt (G), Bolt (H), Hex Nut (I), Collar Bracket (J), and Washer (K) are all included as part of the
hardware kit, in varying quantities based upon the hardware kit one may have. The Tagline (L) enables quick and easy retrieval
of the SRD cable.
Each product model has its own specifications as listed in Figure 1. See Table 1 for more information on Component
Specifications.
A
Figure 2A - Components
C
C
D
D
I
K
B
Figure 2B - Components
D
E
F
G
E
G
J
A
3
F
H
L
F
G
C
B
E
Publicidad
