Publicidad
Idiomas disponibles
Idiomas disponibles
en
3. Press the + button.
The appliance is ready for manual
connection.
The display shows an animation for
5 minutes.
Follow the steps below during this
period.
4. The refrigerator has now set up its
own WLAN network with the network
name HomeConnect.
You can now access this network with
your mobile device.
5. Open the settings menu of the mobile
device and call up the WLAN settings.
6. Connect the mobile device with the
WLAN network HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to
establish the connection.
7. After successful connection, open the
Home Connect app on the mobile
device.
The app will search for the refrigerator.
8. As soon as the refrigerator has been
found, enter the network name (SSID)
and the password (Key) of your own
home network (WLAN) into the
corresponding fields.
9. Confirm with the button Transmit to
domestic appliances.
If the connection is successful, on
■
flashes in the refrigerator display.
You can now connect the
refrigerator with the app.
16
If the display shows oF, it was not
■
possible to establish a connection.
Enter the password again, ensuring
that it is spelt correctly.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process.
Connecting the refrigerator to the Home
Connect app
Once the connection between the
refrigerator and the home network has
been established, you can connect the
refrigerator to the app.
1. Press super button and lock button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock button is pressed for a
longer period. Press lock button again
until the lock is deactivated.
2. Press °C button repeatedly until the
displays PA (pairing = connect with
app) and oF are shown.
3. Press + button to connect the
appliance with the app.
The display shows an animation.
As soon as the refrigerator and the
app are connected, the display shows
on.
4. Open the app and wait until the
refrigerator is displayed.
Use Add to confirm the connection
between the app and the refrigerator.
If the refrigerator is not automatically
displayed, click on Add appliance in
the app and follow the instructions. As
soon as your refrigerator is displayed,
add it with +.
Publicidad
