Jeep JAT Manual De Uso página 19

The verification of the correct tightening of the components using lever systems (quick-clamping
mechanisms), adjusted by acting on the tightening nut and not on the locking lever of the
mechanism, in the absence of technically precise indications of the relative values, can be done
by testing that the relative component being clamped is not mobile and/or unstable if subjected
to a strong attempt to remove and/or pull it out, and by checking that the clamping lever provides
adequate resistance when it is being closed (such as to leave a mark on the palm of your hand, the
so-called "imprint on palm)" and, after closing, requires significant strength to open it.
The possibility of moving the locking lever of the mechanism by exerting minimal manual pressure
indicates an insufficient locking condition requiring further tightening of the adjustment nut.
The electrically power assisted cycle is equipped with a control device located on the handlebars,
an LCD display, powered by the battery supplied with the product, which allows the user to check
the data and manage all the product's electrical and electronic functions.
OVERVIEW OF CONTROLS AND SYMBOLS
A
B
C
A. On/off key
B. Value change and/or increase key (+)
C. Value change and/or decrease key (-)
1. Indicator light for residual battery charge
2. Indicator light for selected pedal assist level / indicator light for walk assist function activation
(WALK)
3. Display of usage data: TRIP / ODO / MAX / AVG / RANGE / CAL / POWER / TIME
4. Digital speedometer: indicator light for speed detected during use (km/h or mph)
5. Indicator light for Bluetooth
5. LCD DISPLAY
1
2
function activation
®
18
5
3
4