Jeep JAT Manual De Uso página 20

DESCRIPTION OF FUNCTIONS
On/Off
Press the On/Off key for at least 2 seconds to switch on the LCD display and enable system
activation.
Press the On/Off key for at least 2 seconds to switch off the LCD display and deactivate the system.
Pedal Assist Level Selection
Briefly press + or - to increase or decrease the level of pedal assist provided by the drive unit.
There are between 1 and 5 selectable levels of pedal assist.
Selecting level 1 sets the mode for minimum electrical pedal assist provided by the drive unit.
Selecting level 5 sets the mode for maximum electrical pedal assist provided by the drive unit.
Pressing the - key until 0 is selected disables the activation of the electrical pedal assist.
Walk Assist Activation
After disabling the electrical pedal assist provided by the drive unit by pressing the - key until 0 is
selected, briefly press the - key until the WALK symbol appears on the display.
Press and hold the - key to activate the walk assist function, indicated by the intermittent presence
of the WALK symbol, which activates minimal electrical assistance provided by the drive unit to
make it easier to move the electrically power assisted cycle when walking alongside it.
Deactivate the function by releasing the - key.
CAUTION
The walk assist function must be used in compliance with the regulations in force in the country
where the product is used, and can only be used when walking alongside the electrically power
assisted cycle, keeping a proper distance from the rotating pedal and crank arm, and holding the
handlebar knobs firmly and with both hands.
DANGER
It is strictly prohibited to enable the walk assist mode when you are sitting on the saddle of
the electrically power assisted cycle to avoid the danger of injury and the risk of damaging the
electrical components of the bike.
19