coloque
las
tuberías
-
correspondientes soportes y conserve el cable de
alimentación eléctrica debajo del cárter del
distribuidor hidráulico.
Almacenamiento de la ensiladora
Aparque el equipo en un lugar seguro, cubierto, que
tenga una superficie plana y consistente en la que no
existan problemas para realizar maniobras con el
tractor. - Nota: evite aparcar el equipo en lugares no
cubiertos ya que la humedad, aunque no condicione
su
funcionamiento,
permite
influyente la formación de oxidación en las partes
metálicas. La misma formación de oxidación puede
tener lugar si poco antes de aparcar la máquina
ensiladora se realiza su lavado.
A la hora de proceder con el tractor en el lugar de
aparcamiento, asegurarse que en el radio de
maniobra no entren personas o animales.
Extraiga la máquina ensiladora del tractor siguiendo
las instrucciones contenidas en el apartado anterior.
IMPORTANTE
Haga que el equipo sea estable sobre el suelo
asegurándose que no haya peligro que se desplace
de modo accidental (fig.C7).
Después de haber alejado de manera suficiente el
tractor de la ensiladora cubrirlo con una lona.
24
hidráulicas
en
los
de
manera
más
place the hydraulic piping on the relative mounts
-
and store the power supply cable under the carter
of the hydraulic distributor.
Storage of the wrapper
Park the equipment in a sure place, covered, that has
a flat and consistent surface and that there are no
problems for the manoeuvres of the tractor. - Note:
avoid to park the equipment in sites not covered
because the humidity, also if it does not effects its
operation, allows in way more evident the rusty
formation on the parts. Such formation will be
possible also after an equipment washing.
Before transporting the equipment to the parking
area, make certain that people or animals do not
enter in the ray of manoeuvre.
Remove the wrapper from the tractor following the
instructions described in the previously paragraph.
IMPORTANT
Stabilise the equipment on the ground and ensure
that it cannot be moved by accident (fig.C7).
After having gotten further how much enough the
tractor from the wrapper to cover it with a cloth.
fig.C7