Descargar Imprimir esta página

cecotec BONGO D20 Serie Manual De Instrucciones página 66

Patinete eléctrico

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
ENGLISH
5.2 Driving modes Fig. 23
Control panel
Power button:
-
Long press: switch the electric scooter on or off.
-
Short press: switch between the following modes:
1. PEDESTRIAN mode: the mode indicator on the display will show a person walking. In this
mode, the scooter can reach 6 km/h. The tail light will flash when driving in this mode.
2. COMFORT mode: In this mode, the scooter can reach 15 km/h.
3. SPORT mode: the mode indicator on the display will show a white "S". In this mode, the
scooter can reach 20 km/h.
NOTE: measured with a weight of 80 kg, fully charged battery, flat surface, no inclination, no
wind, and an ambient temperature of approx. 25°C.
Function button:
- Short press: switch the scooter lights on or off.
- Long press (3 seconds): enter the settings menu.
5.3 Settings menu
Once inside the settings menu, press the power button to switch between P0, P1, R0, and R1.
Press the function button to navigate between the different settings functions (P0 and P1).
Access the desired function by pressing the power button and toggle between 0 and 1 by
pressing the function button. Select the desired setting by pressing the power button. To
return to the initial display, wait a few seconds without pressing any buttons. The different
settings functions are:
1. P0 - Units of measurement: km/h (0) or mph (1). Speed can be measured in kilometres per
hour (0) or miles per hour (1).
2. P1 - Total trip distance measurement (ODO) or current trip (TRIP).
5.4 Wheel use
-
For a correct operation of the electric scooter, you should check and ensure the correct
pressure on the wheels before every use.
-
The optimum pressure for these wheels is de 50 PSI / 3,4 bars / 344 kPa.
-
We recommend you carry out periodic tests to ensure the pressure is between the
recommended values to achieve efficient operation.
-
During the shelf life of these wheels, we recommend using heat-sealing gels to prevent
punctures and maintain maximum effectiveness and performance.
66
ORIGINAL MANUAL TRANSLATION

Publicidad

loading

Este manual también es adecuado para:

07104