Descargar Imprimir esta página

Siemens Orion 2 RIC312 Guia Del Usuario página 12

Publicidad

Idiomas disponibles

Idiomas disponibles

Special listening situations
On the phone
When you are on the phone, hold
the telephone receiver slightly above
your ear. The hearing instrument and
telephone receiver have to be aligned.
Turn the receiver slightly so that the ear
is not completely covered.
Telephone program
You may prefer a certain volume when using the phone.
Ask your Hearing Care Professional to configure a
telephone program.
Switch to the telephone program whenever you are on
X
the phone or use the automatic program switch.
If a telephone program or the automatic program
switch are configured for your hearing instruments, it
is listed in section "Settings".
20
Automatic program switch (AutoPhone)
Your hearing instrument can automatically select the
telephone program when you bring the telephone
handset close to the hearing instrument. When you are
finished speaking on the phone, move the handset away
from the hearing instrument and microphone mode will
re-set itself.
If you want to use this function, ask your Hearing Care
Professional to do the following:
Activate the AutoPhone function.
Check the telephone receiver's magnetic field.
For the automatic program switch, your hearing
instrument detects the telephone receiver's magnetic
field. Not all telephones produce a magnetic field
strong enough to activate the AutoPhone function. In
this case, you can use the Siemens AutoPhone magnet,
which is available as an accessory, and attach it to the
telephone receiver.
See the AutoPhone magnet user guide for instructions on
how to position the magnet.
NOTICE
Use the approved AutoPhone magnet only. Ask
your Hearing Care Professional for this accessory.
21

Publicidad

loading