GB
EMU01128
WARNING INDICATOR(S)
If the engine develops a condition moni-
q
tored by the warning system, an indicator
will come on.
Refer to the "WARNING SYSTEM" sec-
tion for details.
1 Warning indicator(s)
223012
EMU00153
TILT LOCK MECHANISM
(for Manual tilt model)
The tilt-lock mechanism is used to pre-
vent reverse thrust from the propeller lift-
ing the outboard motor when reversing.
q
To lock it, set the tilt-lock lever in the Lock
position.
To release it, place the tilt-lock lever in the
402073
Tilt position.
1 Tilt-lock lever
EMU00154
TILT LOCK MECHANISM
(for Hydro-tilt model)
Tilt-lock mechanism is used to prevent
reverse thrust from the propeller lifting
the outboard motor when reversing. To
lock it, set the tilt-lock lever in the Lock
position. To release it, place the tilt-lock
lever in the Tilt position.
1 Tilt-lock lever
NOTE:
The tilt-lock mechanism on the hydro-tilt
model can be used to keep the outboard
motor at a slightly tilted angle for shallow
water cruising. Refer to CRUISING IN
SHALLOW WATER for the correct opera-
q
402063
tion.
2-13