Storing Outboard Motor - Yamaha F20A Manual Del Propietário

q
w
cC
Do not use the tilt support lever/knob
when trailering the boat. The outboard
motor could shake loose from the tilt
support and fall. If the motor can not be
trailered in the down position, use an
additional support device to secure it in
the up position.
EMU00331*

STORING OUTBOARD MOTOR

When storing your outboard motor for
prolonged periods of time ( 2 months or
longer ), several important procedures
must be performed to prevent expensive
damage.
It is advisable to have your outboard ser-
viced by an authorized Yamaha dealer
prior to storage. However, the following
procedures can be performed by the
owner with a minimum of tools.
cC
8 To prevent problems which can be
caused by oil entering the cylinder from
the sump, keep the engine in the atti-
tude shown when transporting and
storing it.
8 Do not place the engine on its side
000912
before the cooling water has drained
from it completely, or water may enter
the cylinder through the exhaust port
and cause problems.
8 Store the engine in a dry, well-ventilat-
ed place, not in direct sunlight.
1 Vertical position
2 Horizontal position (on the port side)
102**2
4-7
GB