Sauder worksense MASON PEAK Serie Instrucciones De Montaje página 20

Step 14
å
With someone's help, carefully turn the LONG TOP (F) over, and hook the angled edges of the BRACES on the LONG TOP
into the angled edges of the LONG TOP MOLDING (AA) and LEFT PEDESTAL BRACE.
å
Fasten the LONG TOP (F) to the END SUPPORT(X). Tighten two TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the WOOD DOWELS in the END SUPPORT insert into the END SUPPORT TOP MOLDING (N).
å
Remove the SMALL DRAWER (B) from your unit. Push in the black lever on each side of the drawer and pull the drawer
completely out. Refer to the diagram at the bottom of the page.
B
7
To remove the drawer, push the black lever in
and pull the EXTENSION SLIDE on the drawer
from the EXTENSION RAIL on the PEDESTAL.
Page 20
F
N
2
427807
2
Hook the TOP BRACES into
the LONG TOP MOLDING and
LEFT PEDESTAL BRACE.
AA
X
www.sauder.com/commercial-office/service
7