Sauder worksense MASON PEAK Serie Instrucciones De Montaje página 30

Step 24
å
Carefully turn the SHORT TOP (G) over, and hook the angled
edges of the BRACES on the TOP into the angled edges of the
SHORT TOP MOLDING (M) and RIGHT PEDESTAL BRACE.
å
Square up the edges of the SHORT TOP (G) to the LONG TOP (F)
and outer edges of the RIGHT PEDESTAL.
å
Fasten the SHORT TOP (G) to the PLATES on the LONG TOP (F).
Use four BLACK 9/16" LARGE HEAD SCREWS (1S).
Page 30
F
BLACK 9/16" LARGE HEAD SCREW
(4 used in this step)
427807
Hook the TOP BRACES into
the SHORT TOP MOLDING
and RIGHT PEDESTAL BRACE.
G
M
1S
www.sauder.com/commercial-office/service