Descargar Imprimir esta página

Toro TimeCutter 34 Manual Del Operador página 51

Ocultar thumbs Ver también para TimeCutter 34:

Publicidad

Idiomas disponibles

Idiomas disponibles

Storing the Battery
1.
Fully charge the battery.
2.
Let the battery rest for 24 hours, then check the
battery voltage.
Note:
If the battery voltage is below 12.6 V,
repeat steps
1
and 2.
3.
Disconnect the cables from the battery.
4.
Check the voltage periodically to ensure that the
voltage is 12.4 V or higher.
Note:
If the battery voltage is below 12.4 V,
repeat steps
1
and 2.
Battery Storage Tips
If you are storing the battery outside the machine, do
the following:
Store the battery in a cool, dry area in an upright
position.
Do not stack batteries directly on top of each other,
unless they are in cartons.
Do not stack more than 3 batteries (only 2 if the
battery type is commercial).
Test a wet battery every 4 to 6 months and charge
it, if necessary.
Always test and charge the battery before
installation.
49

Publicidad

loading

Este manual también es adecuado para:

Timecutter 427730177404