Quick Start-Up Guide For Acs880 Drives With Primary Control Program; About This Guide; Before You Start - ABB ACS880 Guía Rápida

Quick start-up guide for ACS880 drives with primary control program 3

Quick start-up guide for
ACS880 drives with primary
control program

About this guide

This guide describes the basic start-up sequence of an ACS880 drive equipped with
the primary control program. Complete documentation of the drive firmware can be
found in Firmware manual (see list of manuals on the inside of the front cover).
In this guide, the drive is set up using the ACS-AP-I control panel. The start-up
sequence can also be carried out using the Drive composer PC tool.

Before you start

Ensure that the drive has been mechanically and electrically installed as described in
the appropriate Quick installation guide and/or Hardware manual.
Safety
WARNING! All electrical installation and maintenance work on the drive should
be carried out by qualified electricians only.
Never work on the drive, the braking chopper circuit, the motor cable or the motor
when power is applied to the drive. Always ensure by measuring that no voltage is
actually present.
EN
DE
ES
FI
FR
IT
NL
RU
SV